Selasa, 10 Mei 2011

Beranda » 3 channel audio mixer

3 channel audio mixer

3 channel audio mixer is built using some of the transistor amplifier.
3 channel audio mixer circuit uses voltage 9VDC summber which can supplied from a battery. 3 channel audio mixer circuit is designed special for the purposes of this Public Amplifier.



Because the audio circuit of this mixer is designed specifically for the purpose of a portable mixer for audio public then this series has only a volume control without the tone control. Image series that looks below audio mixer is a series of mono, if you want to make a 3 channel stereo audio mixer it is necessary to make 2 pieces of a series of three channel audio mixer terebut. For more details, a series of three channel audio mixer can be seen in the following image.

3 channel audio mixer
3 channel audio mixer circuit


Sign Component Audio Mixer With 3 Chanel Transistor
P1, P2, P3 = 5K
R1, R11, R15 = 180K
R2, R12, R16 = 2M2
R3, R13, R17 = 750R
R4, R14, R18 = 1K
R5 = 15K
R6 = 220R
R7 = 1.5K
R8 = 820R
R9 = 150R
R10 = 100K
C1, C6, C8 = 1μF-63V
C2, C4, C7, C9 = 100μF-25V
C3, C5 = 220μF-25V
Q1, Q4, Q5 = BC550C
Q2 = BC547 should
Q3 = BC557
J1, J2, J3 = 3mm Mono sockets
SW1, 2,3,4 = SPST Toggle

In a series of three channel audio mixer is equipped with a switch on each chanelnya which select the input impedance, when the switch SW1, SW2 and SW3 in the open then the input should come from the output signal with a high level such as VCD, MP3 player, tape, computer and tuner . And at SW1, SW2 and SW3 closed position, the input should come from a weak audio signals such as microphones.

Tidak ada komentar:

Posting Komentar

Diberdayakan oleh Blogger.